เมจิกอาร์ม, Hotshoe และ Clamp – Tpkung https://tpkung.com Professional Equipment for Filmmaker Wed, 30 Jul 2025 04:00:42 +0000 th hourly 1 https://wordpress.org/?v=6.8.3 https://tpkung.com/wp-content/uploads/2025/07/cropped-f3gaAsset-3ga3-32x32.png เมจิกอาร์ม, Hotshoe และ Clamp – Tpkung https://tpkung.com 32 32 Noga GR9038CA CineArm GR (22 inches) https://tpkung.com/product/noga-gr9038ca-cinearm-gr-22-inches/ Wed, 30 Jul 2025 04:00:28 +0000 https://tpkung.com/?post_type=product&p=1569
Key Features
  • 1/4"-20 Top and 3/8"-16 Bottom Mounts
  • 22" Extended Length
  • 10 lb Weight Capacity
  • Central Locking Knob
]]> This Noga GR Hold-It Articulating Arm features a 1/4″-20 post on top and 3/8″-16 on the bottom. It features an extended length of 22″ and supports up to 10 lb when fully extended, suitable for compact lights, cameras, and other devices and accessories. A central knob locks the center and end joints all at the same time.

]]> Noga MG9038CA CineArm MG (10.5 inches/Large) https://tpkung.com/product/noga-mg9038ca-cinearm-mg-10-5-inches-large/ Wed, 30 Jul 2025 03:56:54 +0000 https://tpkung.com/?post_type=product&p=1565
Key Features
  • 3-Joint Mounting Arm
  • Kip Lever-Based Central Mechanism
  • Horizontal / Vertical Adjustment Support
  • Tilt Movement Supported
  • Equal Length on Both Sides of the Arm
  • Supports Camera Lights & Monitors
]]>

The Noga MG9038CA CineArm MG (Large) is composed of three-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All three-joints can be simultaneously locked using the single central locking knob. While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. With equal length on both sides, the arm offers increased strength and holding resistance.

Three-joint mounting arm
Provides quick and efficient locking or release of arms using a kip lever-based central mechanism
Offers simultaneous locking of all three joints via single central locking knob
Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view
Equal length on both sides of the arms for increased strength and holding resistance
Supports camera lights and monitors
]]> Noga DG9014CA CineArm DG (8.66 inches/Medium) https://tpkung.com/product/noga-dg9014ca-cinearm-dg-8-66-inches-medium/ Wed, 30 Jul 2025 03:55:05 +0000 https://tpkung.com/?post_type=product&p=1561
Key Features
  • 3-Joint Ratcheting Design
  • Central Locking Lever
  • 1/4"-20 Threads
]]>

The Cine Arm DG Hold-It Arm from Noga is a 3-joint mounting arm with 1/4″-20 screws on both ends that allows you to attach an accessory such as a monitor or light on a camera with a 1/4″-20 slot. This flexible arm can be easily adjusted as per your requirement. It also features a central locking ratchet lever that locks the arm in place.

Central locking ratchet lever
1/4″-20 screws on both ends
Rugged metal design
Load capacity of up to 10 lb
Anodized black oxide finish
]]> Noga NF9014CA CineArm NF (4.4 inches/Small) https://tpkung.com/product/noga-nf9014ca-cinearm-nf-4-4-inches-small/ Wed, 30 Jul 2025 03:52:01 +0000 https://tpkung.com/?post_type=product&p=1557
Key Features
  • 3-Joint Mounting Arm
  • Maximum Load Capacity - 7.2 lb
  • Kip Lever-Based Central Mechanism
  • Horizontal / Vertical Adjustment Support
  • Tilt Movement Supported
  • Equal Length on Both Sides of the Arm
  • Supports Camera Lights and Monitors
  • Lightweight - 0.6 lb
]]>

The Noga NF9014CA CineArm NF (Small) is composed of 3-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All 3 joints can be simultaneously locked using the single central locking knob. You can use the articulating arm for loads up to 7.2 pounds.

While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. With equal length on both sides, the arm offers increased strength and holding resistance.

You can attach the articulating arm to a wide range of cameras via 1/4″ -20 top and 1/4″ -20 bottom screws. Lastly, it weighs just 0.6 pounds.

Three-joint mounting arm
Provides quick and efficient locking or release of arms using a kip lever-based central mechanism
Offers simultaneous locking of all three joints via single central locking knob
Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view
Equal length on both sides of the arms for increased strength and holding resistance
Attaches to a wide range of cameras via 1/4″ -20 top and 1/4″ -20 bottom screws
Supports camera lights and monitors
Ensures enhanced portability owing to its lightweight – (0.6 lb) construction
]]> NOGA LC9014CA Cine Arm LC Hold-it Arm Top: 1/4″ Bottom – 3-Joint Design https://tpkung.com/product/noga-lc9014ca-cine-arm-lc-hold-it-arm-top-1-4-bottom-3-joint-design/ Wed, 30 Jul 2025 03:46:50 +0000 https://tpkung.com/?post_type=product&p=1552
Key Features
  • 3-Joint Design
  • Central Locking Knob
  • 1/4"-20 Male Threads
  • Up to 4.4 lb Load Capacity
]]>
The Cine Arm LC Hold-It Articulating Arm from Noga is a rugged, lightweight 3-joint mounting arm with 1/4″-20 screws on both ends that allow you to attach an accessory such as a monitor or light on a camera with a 1/4″-20 female slot. This flexible arm can be easily adjusted as per your requirement and has a load capacity of 4.4 lb. It also features a central locking knob that simultaneously locks all three joints.
]]> Vlogger Multi Function Crab-Shaped Clamp With Built-in 1/4 and 3/8 Threaded Holes https://tpkung.com/product/vlogger-multi-function-crab-shaped-clamp-with-built-in-1-4-and-3-8-threaded-holes/ Tue, 22 Jul 2025 17:39:26 +0000 https://tpkung.com/?post_type=product&p=1217 Vlogger Multi-Functional Crab-Shaped Clamp. Provides the capability to mount a camera, light or monitor to a rod system. The spring-loaded wingnut fastener opens and closes the jaws from a minimum of 15mm to a maximum of 42mm. With a quality design and build, this crab clamp will be sure to hold up in any conditions.

Features

  • Anti-Slip Rubber Pads Inside Jaw
  • 1/4″-20 and 3/8″-16 Threaded Holes
  • ARRI 3/8″-16 Accessory Mount Point
  • Spring-loaded Wingnut Fastener 
  • 1/4″-20 thread with O-ring 

Package Content:

  • 1x Vlogger Crab Clamp
  • 1x Hex Key
  • 1x 1/4-20 to 3/8-16 adapter
  • 1x 1/4-20 to 1/4-20 stud
  • 1 1/4-20 to 3/8-16 adapter key
]]> Vlogger Advanced Monitor Mounting Kit (SPH-01) https://tpkung.com/product/vlogger-advanced-monitor-mounting-kit-sph-01/ Tue, 22 Jul 2025 17:33:50 +0000 https://tpkung.com/?post_type=product&p=1208 The Vlogger Advanced Monitor Mounting Kit is an updated version of the highly popular Vlogger ‘Snail’ Monitor Mount.   Featuring an increased payload and locating pin with 1/4inch screw, providing a firm attachment for small external monitors and other devices.  The larger design can accommodate a greater payload and the swivel action has been redesigned for a smoother rotation.

 

Features： 

  • 180 degree tilt & 360 degree swivel 
  • Re-designed swivel mount 
  • 1/4-20 screw with locating pin
  • Rubber Padding for top plate 
  • Standard cold shoe mounting  
  • Great for 5″ and 7″ external monitors

 

Specifications:

  • Dimensions:   40x28x45mm
]]> Kamerar 11″ Tough Friction Arm https://tpkung.com/product/kamerar-11-tough-friction-arm/ Tue, 22 Jul 2025 17:30:53 +0000 https://tpkung.com/?post_type=product&p=1201 Features:
Each side provides 1/4-20 male threaded stud with knurled textured locking discs (It can hold up to 1 lb) Center Joint with thrust bearing locking knob Stainless Steel Ball Joints with Micro Textured Surface
This listing Includes: 1x 11" Kamerar Tough Friction Arm Only
]]> The KAMERAR ‘TOUGH’ Friction Magic Arm was exclusively designed from the ground up. Every section of the ‘Tough’ Arms were improved over other existing arms on the market. The stainless steel accents and black anodized finish provide both a professional aesthetic and an extremely long lasting durable finish.

The three independent joints allow you to quickly change it’s position with a single locking knob. Between the locking knob is a thrust bearing that assists to make locking easier, and stronger.

The middle joint uses specially patterned teeth that locks into place preventing slippage from even the heaviest loads. An o-ring prevents contaminants keeping the Kamerar ‘Tough’ Friction Arms working smoothly.

The ball joints are made from durable Stainless steel with a specially micro textured surface to increase grip rate by more than 36% above other similar products on the market.

The friction arm has two 1/4″ male threads that can attach to many standard photo and video accessories including lights, portable audio recorders, wireless audio recievers, LCD monitors, and more.

The Kamerar ‘Tough’ Friction Arm comes with a female coupler to attach to another male thread. It is a perfect accessory to use with the Kamerar Tank Video Cage.

]]> Kamerar 7″ Tough Friction Arm https://tpkung.com/product/kamerar-7-tough-friction-arm/ Tue, 22 Jul 2025 17:29:10 +0000 https://tpkung.com/?post_type=product&p=1197 Features:
Each side provides 1/4-20 male threaded stud with knurled textured locking discs (It can hold up to 1 lb) Center Joint with thrust bearing locking knob Stainless Steel Ball Joints with Micro Textured Surface
This listing Includes: 1x 7" Kamerar Tough Friction Arm Only.
]]> The KAMERAR ‘TOUGH’ Friction Magic Arm was exclusively designed from the ground up. Every section of the ‘Tough’ Arms were improved over other existing arms on the market. The stainless steel accents and black anodized finish provide both a professional aesthetic and an extremely long lasting durable finish.

The three independent joints allow you to quickly change it’s position with a single locking knob. Between the locking knob is a thrust bearing that assists to make locking easier, and stronger.

The middle joint uses specially patterned teeth that locks into place preventing slippage from even the heaviest loads. An o-ring prevents contaminants keeping the Kamerar ‘Tough’ Friction Arms working smoothly.

The ball joints are made from durable Stainless steel with a specially micro textured surface to increase grip rate by more than 36% above other similar products on the market.

The friction arm has two 1/4″ male threads that can attach to many standard photo and video accessories including lights, portable audio recorders, wireless audio recievers, LCD monitors, and more.

The Kamerar ‘Tough’ Friction Arm comes with a female coupler to attach to another male thread. It is a perfect accessory to use with the Kamerar Tank Video Cage.

]]>